IK Rating – What does Impact Protection(IK) Rating mean?

The IK rating means the degrees of protection provided by enclosures for electrical equipment against external mechanical impacts or shocks in joules. The IK rating consists of two digits (00 to 10) after the term ‘IK’ (e.g. IK05). IK ratings are particularly important for lights and lighting fixtures that may be fitted in an area … Read more

What does IP65 mean? IP65 Rating Explained

The IP65 means the degree of protection against accidental contact and ingress of dust along with water jets from any direction. Here, “IP” stands for Ingress Protection, and the digits “65” describe the exact degree of protection against contact and the ingress of foreign bodies as well as water. You may have seen IP ratings … Read more

Light Beam Angle-The Ultimate Guide

The beam angle of a light or lamp is the angle of light distribution or emission. This angle of lighting also determines how much area will be covered by light. Lamps come in a variety of beam angles from as narrow as 4 degrees to as wide as 120 degrees (e.g. SMD LEDs). For example, … Read more

Maintenance costs of LEDs

You probably already know: LED lighting is not only more environmentally friendly, it also saves money on your electricity bills. But one of the most underrated benefits of LED lighting is the lower maintenance costs. This will amortize your initial costs at the speed of light – and there will be no further expenses for … Read more

What is lumen?

Lumen is a unit of measure for the amount of visible light emitted by a source. It is defined as the amount of light that is emitted per unit of time and is used to measure the brightness of a light source. Lumens = Light Output The higher the number of lumens, the brighter the … Read more

What are the advantages of LED? 5 reasons why you should switch immediately

The trend when it comes to lighting is clearly going in one direction: LED. Whether for offices, industry and warehouses, underground garages or as safety lighting for the area of ​​your headquarters: LED is worthwhile in several ways. The advantages are obvious, because not only does the environment benefit from the light-emitting diodes, but also … Read more

Why should you stop using fluorescent tubes?

In the past, fluorescent tubes were good alternatives to incandescent lamps and halogens. But they have many disadvantages: They start slowly, flicker, make noises, have a short service life, and high energy consumption. That is why it is worth switching to LED. LEDs are not only much more efficient, but they also last up to … Read more